Não conhecido fatos sobre batteries
Não conhecido fatos sobre batteries
Blog Article
The electrochemical reaction in a battery is carried out by moving electrons from one material to another (called electrodes) using an electric current. The first battery was invented in 1800 by Italian physicist Alessandro Volta.
Better sealing technology and plastics are making further development of all cell systems possible, particularly those using very active lithium for the anode. This situation has yielded commercial cells with as much as 3.nove volts on load and very high current-carrying capability.
Batteries can act as a pushing force to push the electrons through a component to make it work. Batteries can only act as the pushing force for a limited amount of time, this depends on how much charge the battery has and also how much energy is demanded by the load.
They are also used where it would be too expensive or impractical to use a single charged battery. Small-capacity secondary batteries are used in portable devices such as mobile phones, while heavy-duty batteries are found in electric vehicles and other high-drain applications.
Batteries can only provide a DC power supply that is generated from a chemical reaction that takes place within the battery. Batteries also only ever feature positive and negative terminals where the current will only ever flow in the same direction between the two terminals.
Primary batteries are designed to be used until exhausted of energy then discarded. Their chemical reactions are generally not reversible, so they cannot be recharged. When the supply of reactants in the battery is exhausted, the battery stops producing current and is useless.[29]
Picture a D-cell battery that once was the common perception of a battery. This kind of battery powered flashlights and toys, and had to be replaced once it was dead. Now, picture the need for lightweight, rechargeable energy storage systems that power our cars down the road or that are as large as an office building, storing energy from renewable resources so they can be used when and where they are needed on the grid.
Disposing of a battery via incineration may cause an explosion as steam builds up within the sealed case.
Overcharging (attempting to charge a battery beyond its electrical capacity) can also lead to a battery explosion, in addition to leakage or irreversible damage. It may also cause damage to the charger or device in which the overcharged battery is later used.
Zinc-air: Several technologies and configurations employ metallic zinc as the battery anode. Zinc-air batteries generate electricity when zinc is oxidized with oxygen from the air. They have a higher energy density than lithium-ion batteries, meaning that they can store more energy in a smaller space. The small batteries used in hearing aids today are typically zinc-air batteries, but they could also be used at larger scales for industrial applications or grid-scale energy storage.
Batteries that successfully traverse the esophagus are unlikely to lodge elsewhere. The likelihood that a disk battery will lodge in the esophagus is a function of the patient's age and battery size. Older children do not have problems with batteries smaller than 21–23 mm. Liquefaction necrosis may occur because sodium hydroxide is generated by the current produced by the battery (usually at the anode). Perforation has occurred as rapidly as 6 hours after ingestion.[77]
The voltage of an individual cell and the diffusion rates inside it are both reduced if the temperature is lowered from a reference point, such as 21 °C (70 °F). If the temperature falls below the freezing point of the electrolyte, the cell will usually produce very little useful current and may actually change internal dimensions, resulting in internal damage and diminished performance even after it has warmed up again.
This technology contains liquid electrolyte in an unsealed container, requiring that the battery be kept upright and the area be well ventilated to ensure safe dispersal of the hydrogen gas it produces during overcharging. The lead–acid battery is relatively heavy for the amount of electrical energy it can supply. Its low manufacturing cost and its high surge current levels make it common where its capacity (over approximately 10 Ah) is more important than weight and handling issues. A common application is the modern car battery, which can, in general, deliver a peak current of 450 amperes.
When a battery is recharged at an excessive rate, an explosive gas mixture of hydrogen and oxygen may be produced faster than it can escape from within the battery (e.g. through a built-in vent), leading to pressure build-up and eventual bursting of the battery case. In extreme cases, battery chemicals may spray violently from the casing and cause injury. акумулатори бургас An expert summary of the problem indicates that this type uses "liquid electrolytes to transport lithium ions between the anode and the cathode. If a battery cell is charged too quickly, it can cause a short circuit, leading to explosions and fires".